This is a preview of the New Products that will be on display at The International Robots & Vision Show. Be sure to stop by the exhibitor's booths for more information.

Allison Park Group, Inc. – Booth 1411
L6 Industrial Camera Enclosure
APG is introducing our new L6 Enclosure, specifically designed for food processing and highly corrosive environments. The L6 is a 316 stainless steel housing designed for a variety of upright cameras including offerings from Banner, Cognex, and DVT. The enclosure is highly configurable, with options for both multi-cable (drillable) and single cable cord grips, air cooling, and both internally and externally fed air curtain options. The enclosure also is designed to readily accommodate both round and square ringlights up to 3''' x 3'''.

Basler's eXcite camera seriesBasler, Inc. – Booth 1417
Basler Launches the eXcite, an Intelligent Camera Series
Basler's newest player in the vision components arena, the eXcite, is an integration of two complex components, a top-quality digital camera and a complete, high-performance PC. A 1.0 GHz MIPS processor running under Linux is the heart of Basler's eXcite. The digital camera component is based on a CMOS sensor with VGA resolution and captures up to 180 frames per second. eXcite combines the processor and the camera in a very small, industrial grade housing. With its versatile interface design and array of built-in features, the eXcite is a flexible, high-performance platform and is well suited for a wide range of industrial purposes in a variety of contexts.

Basler's A6000f cameraBasler Introduces New Members in the Successful A600 Family
The monochrome and color versions of the A631f and A641f are based on 1.45 and 2 magapixel CCD sensor and runs up to nearly 19 and 14 frames per second. These new cameras feature excellent image quality and their unique smart features set provides high added value to the customer. Basler A600 Series cameras are designed for industrial users. Their compact size and the ease of integration associated with their IEEE 1394 interface make A600 cameras ideal for analog users seeking the advantages of digital video. A600 high-performance cameras are a perfect fit for a variety of applications including: semiconductor and component inspection, manufacturing quality control, food and beverage inspection, microscopy and medical imaging, biometrics, and many other vision applications.

Cognex's FireWire Acquisition softwareCognex Corp. – Booth 519
Cognex FireWire acquisition software
FireWire acquisition for PC vision systems enables direct connection of IEE 1394-compliant FireWire cameras to PCs running Cognex VisionPro® or CVL® machine vision software. FireWire simplifies integration, expands acquisition options, and allows customers to cost-effectively achieve high quality digital images without using a frame grabber. Compared to traditional FireWire implementations, the Cognex FireWire implementation is optimized for the high speed typically required for industrial machine vision applications. FireWire systems utilize the same application development software, vision tools, and proven acquisition engine as other Cognex PC Vision Systems. Additionally, FireWire cameras can be added to existing Cognex frame grabber systems.

Cognex's MVS-8600 series frame grabbersMVS-8600 Series Camera Link frame grabbers
The MVS-8600 series frame grabbers combine Cognex industrial-grade vision tools with high-speed, high-resolution cameras that support the Camera Link digital communications standard. This provides Cognex PC Vision System customers with fast processing of large quantities of digital image data. The MVS-8600 frame grabbers support a broad range of area scan and line scan Camera Link cameras. The MVS-8600 frame grabbers integrate on-board I/O functions and triggering capabilities, eliminating the need for additional I/O hardware within the host PC. By incorporating encoder inputs, the MVS-8600 series frame grabbers simplify the synchronization of the vision system with line speed in linescan applications.

Cognex's In-Sight 5403In-Sight 5403 2-magapixel vision sensor
The 2 megapixels In-Sight® 5403 vision sensor captures full-frame, 1600 x 1200 images at up to 15 frames per second for highly detailed inspection of fast-moving objects. The 5403 provides superior accuracy for precision gauging, alignment and fine-defect inspection on very small parts. By capturing images of larger parts or viewing multiple objects simultaneously, the 5403 performs inspections that formerly required multiple sensors. The 5403 can also be mounted farther from the part while maintaining the required resolution to provide working distance flexibility. The In-Sight 5403 meets IEC specifications for shock and vibration and achieves an IP67 (NEMA 6) rating.

 

 

VisionPro 4.0 Machine Vision Software with .NET support
VisionPro® PC vision software from Cognex supports the Microsoft Visual Studio .NET programming environment, enabling VisionPro users to integrate third-party .Net objects into their vision applications and integrate vision applications with their automation systems. VisionPro with Visual Studio .NET allows users to speed the development of vision applications in several ways: Vision applications can be merged with motion control, I/O, and factory communications; custom tools can be integrated with VisionPro tools; and databases and charting functions can be incorporated into vision applications. PC-based VisionPro includes a vision-tool library and supports a variety of Cognex frame grabber and industrial-camera options. www.cognex.com

Fiberoptics Technology Inc – Booth 1823
SOL-R DL Light source
DC regulated 150W SOL-R lightsource manufactured using a re-configurable platform and exclusive ''lamp tuning''; allowing the user to position the lamp at infinitely adjustable focus distances - ''tune'' the lamp to maximize performance for any reflector/bulb/fiber input combination. – maximize intensity and uniformity using any 21 volt lamp. A full range of adapters allow the use of all suppliers fiber optic components.

Fortress Interlocks' eGardFortress Interlocks – Booth 932
eGard 
eGard is a completely new approach to controlling access to hazardous machinery and equipment. It enables a selection of modules including both mechanical trapped key and electrical safety gate switch interlocks to be integrated in one unit. Modules also include safety switches, service modules such as indicators and buttons, emergency stops, and a selection of actuators suitable for both hinged and sliding doors. eGard can therefore be customized for every application, providing a single source of gate access hardware. eGard can be connected to programmable logic controllers (PLCs) and mimic panels, or can be used on an AS-interface network.

Koyo Encoder's TRD-M3AKoyo Encoder, Inc. – Booth 936
TRD-M35A Modular Absolute Multi-Turn 33 bit
TRD-M35A is a modular type absolute multi-turn encoder that is used in applications such as intelligent AC servo motors, industrial robotics injection machines, and wafer transfer robots in semiconductor production. It features 1.5” outside diameter modular kit design and ultra light weight of 1.0 oz. The resolutions provided are 17 bits/turn (0 to 131,071 addresses) for single turn and 16 bit turns (65,526 turns) for multi-turn. Serial communication interface allows user to configure up to 8 axes through Bus connection with LSI signal receiver chip.

Lumenera camerasLumenera Corporation – Booth 1707
Lumenera's NEW 6.6 Megapixel USB 2.0 Industrial Camera
Lumenera’s 6.6 megapixel CMOS camera is ideal for a variety of applications where high resolution detail is required including print verification, defect analysis, off-line inspection, documentation and medical applications. Save time integrating with the simplicity of USB 2.0 and DirectShow connectivity, and save money as the 3000x2200 pixel array offers a cost effective solution to replace up to 6 standard cameras while imaging a large area. The Lw620/Lw625 offers 5fps, high dynamic range (+100dB), and anti blooming characteristics, providing greater contrast/edge definition to improve your measurement accuracies. Available as board-level (Lw620) or enclosed (Lw625). For more information visit www.lumenera.com, or contact us at (t) 1.613.736.4077, or industrialsales@lumenera.com.

Lumenera's 2.0 megapixel CCD CameraLumenera's NEW 2.0 CCD Megapixel USB 2.0 Industrial Camera
Lumenera’s 2.0 megapixel CCD camera is ideal for a variety of applications where high resolution detail is required including print verification, defect analysis, off-line inspection, documentation and medical applications. Save time integrating with the simplicity of high-speed USB 2.0 and DirectShow connectivity. The Lw230/Lw235 offers 12 fps at full 1616x1216 resolution, a high quality CCD sensor, low noise, and excellent sensitivity with high color reproductivity, providing greater contrast/edge definition to improve your measurement accuracies. Available as board-level (Lw230) or enclosed (Lw235), color or monochrome. For more information visit www.lumenera.com, e-mail us at e-mail us at industrialsales@lumenera.com, or contact us at (t) 1.613.736.4077.

Matrox's Imaging Library 8.0Matrox Imaging – Booth 1917
Matrox Imaging Library (MIL) 8.0
Matrox Imaging has announced the latest release of its award-winning software development toolkit, Matrox Imaging Library (MIL) 8.0. This high-level programming library has an extensive set of optimized functions for image capture, image processing, pattern recognition, blob analysis, edge extraction and analysis, measurement, character recognition, 1D and 2D code reading, calibration, graphics, image compression, display and archiving. Designed to facilitate development and increase productivity, MIL offers a common C API that supports Matrox Imaging's entire hardware line, and an intuitive and easy-to-use function set.

Nachi Robotic Systems Inc. – Booth 409
NV-AX Vision Sensor
The NV-AX Vision Sensor is an image processing system that is integrated into the AX controller. Nachi's proprietary stereo recognition algorithm measures part positions in 3D. The robot excels in 'bin picking' applications. Nachi's high-speed search tool tolerates real world factory conditions and correctly identifies parts. The robot and vision integrated AX control offers easy programming in the intuitive Windows environment and provides a single point of operation for both robot and vision. Applications include bin picking, multi-part processing, measurement, and product inspection.

NERLITE S-20 Spot IlluminatorNER – Booth 1341
S-20 Illuminator
NERLITE S-20 Spot Illuminators are cost-effective bright or dark field lighting sources for small field of view applications. The S-20's single High FLUX LED with collimating lens efficiently concentrates light energy to deliver maximum intensity from a minimal package (38 x 35 mm). Designed for use with constant current power sources, S-20’s provide stable light output for consistent application performance, increasing application up-time and decreasing false errors. S-20 models are conservatively rated for 50k + hour (5.7 year!) life expectancies to minimize system maintenance requirements. Available in several wavelengths, S-20’s enable the use of color to enhance image contrast.

 

NERLITE SCDI-50 V2SCDI-50 V2
NERLITE SCDI®-50 V2 (Version 2) machine vision Illuminators are designed for applications involving highly specular surfaces where unwanted 'hot spots' or dark spots cause noise in image processing. Increased light intensity and a fan-free design for environments where airflow disruptions are not allowed and/or where air born dust penetration is a problem distinguish the SCDI-50 V2 from earlier models. Available in a variety of wavelengths and with 12 or 24 volt continuous and 24 volt strobed power options. Application examples: inspection of CD/DVD labels, solder patterns, blister-packed pharmaceuticals, and IC's in tape.

NERLITE LA-288LA-288
NERLITE LA-288 High Intensity Linear Arrays employ a focusing lens to concentrate light energy from High FLUX LEDs onto a long, narrow field of view. This design enables both high-speed applications where short exposure times demand high light intensity and lower speed applications where ambient lighting or light absorbing subject matter defeats lower intensity sources. Driven with constant current controllers, LA-288’s provide long life with stable light output for consistent application performance and up-time. With passive cooling and sealed aluminum housings, LA-288's address installation requirements from clean rooms to tougher production floor environments. LA-288’s are available in several wavelengths.

PIAB's LC-30PIAB Vacuum Products – Booth 1132
LC-30 Level Compensator
A new device that allows for extremely flexible material handling with suction cups. Designed to adjust level differences in lifting devices that are fitted with several suction cups, the LC30 decreases demand for exact vertical positioning. The LC30 is intended for material handling applications in a range of industries, including packaging, automotive, appliances, wood, HVAC, and other industries that require a high degree of automation. The LC30 can mount directly in the groove of an aluminum profile, and is easily fixed in place with a hexagonal screw and T-nut.

 

PIAB's P3010 AVMP3010AVM Vacuum Pump
The P3010 AVM is a mini-sized compact, compressed air driven vacuum unit that boasts of multiple integrated control functions. PIAB’s P3010 AVM is ideal for highly automated manufacturing processes where robots are used in handling of metal sheets, boards and plastic items in a variety of industries. The P3010AVM features two built-in vacuum switches for more efficient and reliable handling of objects. These vacuum switches are used to send a ready-signal when the object to be handled is gripped, and a signal to activate the energy-saving function. The unit also has a valve for start/stop of the pump, plus a blow-off valve.

Pleora's PT1000-VBPleora Technologies Inc. – Booth 1926
iPORT™ PT1000-VB In-Camera IP Engine
Pleora’s iPORT™ PT1000-VB In-Camera IP Engine is the industry’s first off-the-shelf OEM board for adding GigE connectivity to industrial cameras. It allows manufacturers to integrate high-throughput, real-time GigE connectivity into almost any camera quickly, easily, and cost-effectively. The board is optimized for in-camera design, with a small, square footprint, power consumption of only 2.25 W, and vertical mounts for power, GPIO, and GigE. Straightforward interfaces to parallel data, clocks, line, and frame signals allow most cameras, including Camera Link models, to support GigE with a simple change-out to their back-end electronics. Check out www.pleora.com or contact us at info@pleora.com.  

Precise Automation's PrecisePlace Precise Automation, LLC – Booth 1530
PrecisePlace 1300c
The PrecisePlace series of Cartesian robots handle a 1 Kg payload and are scalable to manage a work area of up to 400mm by 2000mm. They feature a zero-backlash drive system using brushless DC motors for very quiet and smooth operation. They are available in three or four axis configurations, and have been designed for high reliability and zero maintenance.  An extremely powerful controller, the Precise Automation Guidance 3400, is located inside the robot. It contains 4 motor drivers, 6 encoder input channels, a 700 MIPS processor, digital and analog inputs and outputs, and Ethernet, DeviceNet, and RS-232 interfaces.

Precise Automation's Guidance 3400Guidance 3400 Motion/Vision Controller
The Guidance 3400 is the first in a series of motion controllers from Precise Automation based on a distributed network architecture that allows the controller to be located at the point of use. The Guidance 3400 controls 4 axes of motion and contains 4 motor drivers, 6 encoder input channels, a 700 MIPS processor, digital and analog inputs and outputs, and Ethernet, DeviceNet, and RS-232 interfaces. It can produce up to 2,000 watts of motor power in a package 180mm long by 70mm wide by 70mm high. It is small enough to be placed inside machines, eliminating the need for a separate control cabinet.


 

Redlake's ES11000 cameraRedlake – Booth 1516
MegaPlus II EC11000
The EC11000 is the latest addition to Redlake's MegaPlusII camera family. It is an actively cooled version of the popular 11MP ES11000 camera supporting up to 5 frames per second at 12-bits per pixel. Using Peltier cooling, both dark noise and thermal drift are significantly reduced making the camera the perfect solution for the most demanding scientific and industrial applications. The EC11000 is unique in that it separates and isolates the camera’s primary electronics from the sensors cooling path, and features a fan optional design, allowing it to operate in cooling modes with or without a fan accessory attached.  

SCHUNK's PT-AP 70SCHUNK Inc. – Booth 1131
PT-AP 70
SCHUNK has introduced the new PT-AP70 servo actuated gripper. The PT-AP70 was specifically designed to make difficult components such as glass, foam or sand molds easy to manage. The direct current servomotor is coupled to a gear driven ball bearing spindle. The fingers are guided with low friction linear bearings to allow ultra sensitive fully controllable actuation. Grip force, stroke and actuation acceleration can be dynamically controlled or controlled by pre-programmed parameters downloaded to the gripper. In contrast to pneumatically actuated units, the servo actuation is fully flexible. The gripper has 70 mm of total stroke with the capability to produce 200N (45lbf) of grip force.


SCHUNK's PT-AS 70PT-AS 70
The new servo actuated rotary PT-AS70 is a direct current servomotor coupled to a gear driven axis providing unlimited rotation capability. All of the rotation attributes can be controlled such as acceleration, speed and deceleration. The current can even be monitored to control or limit the rotational torque. The rotary produces up to 23Nm (17ft.lbf) max torque with a nominal output of 7Nm (5ft.lbf). Maximum velocity is up to 470degrees/s at an acceleration rate of 880degrees/s2. Repeatability is less than +/-0.02degrees under nominal conditions. The unit’s overall mass is less than 1.7Kg(3.7lbf). The PT-AS70 is an ideal match for the PT-AP70 servo-electric gripper allowing simple plug-and-plan functionality.


SCHUNK's EGN 100EGN 100 / EZN 64
SCHUNK Inc. introduces a new series of servo-electric grippers, EGN 100, a 2-finger parallel type and EZN 64 of the 3-finger centric type. Due to the integrated servomotor and encoder for position feedback, the grippers can be actuated in either a force or positioning mode and it allows for adjustment of the gripping force, position or speed. The EGN 100 gives a stroke range of up to 20mm and a grip force of up to 600 N (135 lbf). The EZN 64 has a stroke of up to 12mm and a grip force of 500 N (112 lbf).


Sony's XCD-V50 CameraSony Visual Imaging Products – Booth 1723
XCD-V50 IEEE 1394.b Camera
Sony’s new XCD-V50 monochrome VGA IEEE 1394.b camera incorporates a 1/3” progressive scan CCD with square pixels. This ultra-compact digital camera features fast frame rates and 8 or 14-bit output. This camera with its 1394.b interface supports cables up to 100 meters, plus can daisy-chain multiple cameras on a single run to increase cable run capability. The XCD-V50 enhances Sony’s comprehensive lineup of digital cameras by offering choice of CCD size, monochrome/color and resolution from VGA to SXGA. Best of all, the XCD-V50 is backward compatible with conventional 1394 via IIDC 1.31 support. A color version is also available (XCD-V50CR).

Sony's XCI-SX1XCI-SX1 Smart Camera
Sony’s XCI-SX1 is its first Smart camera in a new series of products. This camera provides OEMs, system integrators and vision tool manufacturers a rugged, robust component, combining the imager, intelligence and interface in a single plug-in modular that is simple to set up and easy to integrate. The XCI-SX1 incorporates a ˝” progressive scan CCD with square pixels that produces high-quality SXGA images at selectable frames rates. It also features a Linux® based operating system, 400 MHz AMD Geode GX533 processor, an integrated 128MB Compact Flash™ memory card and extensive I/O connectivity via Ethernet, USB serial port and monitor out.

Imagelite 21DCL from StockerYaleStockerYale Inc. – Booth 1423
Imagelite™ Model 21DCL
StockerYale's family of Model 21DC Fiber Optic Illuminators have been designed specifically as a cost effective, high-quality DC regulated light source for use in demanding machine vision applications where stability and control of light output are requirements.  The Model 21DCL incorporates all of the features in the Model 21DC family of products, offering superior control of illumination. This configuration provides the most complete range of functions including both RS-232 digital interface and optical loop feedback. With constant power-regulated output as the default, this system may be changed to constant current-regulated mode using the optional Commander™ operating software.


Lasiris Reduced Speckle Line GeneratorLasiris™ Reduced Speckle Line Generator
StockerYale’s Lasiris™ Reduced Speckle Line Generator significantly diminishes the speckle content apparent in standard lasers, thereby increasing the accuracy of machine vision profiling applications. With its low spatial coherence and spectrally broadband beam, the module provides low speckle noise while maintaining tight focusing performance.  The Reduced Speckle Line Generator can emit red (680 nm) or infrared (810 nm) beams and is particularly useful in applications such as high accuracy machine vision, 3D contour mapping, biometrics and semiconductor inspection.

 

StockerYale's Model 12 HemiLiteModel 12 - 4' HemiLite™ SFVI
StockerYale’s Model 12 HemiLite™ Spherical Fluorescent Vision Illuminator (SFVI) is designed for use in machine vision applications where highly diffuse, uniform illumination is required to detect surface defects on rough and/or specular surfaces. This lamp assembly offers exceptional, flicker-free illumination and is available in a 4” (101.6mm), as well as a 6” (152.4mm) diameter diffusing sphere that incorporates an innovative lamp design to provide full hemispherical illumination.  The standard, high-frequency (25 kHz) driver is available as a plug-in style for quick and easy setup, or as an in-line style for applications requiring more versatile mounting configurations such as panel mounting.

 

StockerYale's COBRA BacklightCOBRA™ Linescan Backlight
StockerYale is launching the new COBRA Linescan Backlight, available in wavelengths from 395 to 830 nm. Applications include the inspection of foil, paper, non wovens, metal and currency. The backlight incorporates StockerYale’s patented chip-on-board reflective array (COBRA) technology. COBRA is an innovative method of creating high-power thermally-efficient LED illuminators. Each LED chip is placed at the center of a sub-millimeter cup-like metal structure, which serves both as an optical reflector and as a thermal conductor. High packing density results in uniquely intense, uniform backlighting.

United Equipment Accessories' Teach PendantUnited Equipment Accessories – Booth 1831
Teach Pendant Cable Reel
United Equipment Accessories Teach Pendant Cable Reels provide absolute reliable transmission of Profibus, DeviceNet, CC-Link, ControlNet, J1939, and other sensitive signal data. UEA teach pendant reels are available in three different frame sizes to meet application extension requirements up to 100’. Multiple conductor ratings for amperage and voltage in one unit are also offered with a United Equipment teach pendant reel. Each reel can be customized to meet customer requirements.

 

Vision Components GmbH – Booth 1609
VC4038 multitasking Smart Camera
The real-time and network enabled industrial VC2038 DSP smart camera offers 3200 MIPS on-board processing power, 32 Mbyte DRAM, 4Mbyte Flash-EPROM, 128 Mbyte SD card, built-in Ethenet/TCP/IP, 640x480 pixel resolution at 63 frames/sec. Pre-emptive multi-tasking makes it possible to run several processes at the same time. The highly integrated, rugged, compact, single unit smart camera is targeted for high-speed assembly line, motion analyses, motion tracking, mechanical engineering, medical, security applications. Comprehensive, one-time license SDK presents ideal tool for OEMs and system integrators to craft next generation machine vision systems.

VITRONIC's VIROwsi weld seam inspectionVITRONIC Machine Vision Ltd. – Booth 1739
VIROwsi - 3D weld seam inspection
VIROwsi for a 100% reliable three-dimensional inspection of seams.  VIROwsi is an adaptable three-dimensional machine vision system for the inspection of weld seams, brazing seams and sealant beads. The system provides an automatic, three-dimensional inspection which will work on multiple seams of different types, shapes and sizes. It detects the seam’s length, width, height, volume as well as porosity, surface voids and undercuts. VIROwsi operates with scan speeds of up to 164 ft/min. An automated 3-D inline seam inspection using VIROwsi increases the degree of automation and improves the quality of the parts before further processing or distribution.

Volpi's White LED focusable RinglightVolpi USA – Booth 1508  
Focusable LED Ringlight  
Volpi introduces an innovative White LED Ringlight with an adjustable spot size for variable working distances from 80 to 150 mm. The Focusable Ringlight consists of 12 high intensity White LED’s at a color temperature of 5500 K and the spot size can be varied from 20 to 150 mm. The adjustable optics provide homogeneous, shadow-free illumination and variable intensity control. The mounting diameter is 66 mm with adapters available for various lens sizes. Options include a Polarizer Filter Set, and other LED colors in Red, Yellow, Green and Blue for enhancing contrast in a variety of machine vision applications.

WAGO's 753 SeriesWAGO Corporation – Booth 1629  
WAGO 753 Series Pluggable I/O
The WAGO-I/O-SYSTEM has been expanded to offer pluggable connectors for I/O module wiring.  Designated the 753 Series, allows customers to pre-manufacture wiring harnesses using the 753 Series Connectors and simply plug them into the 753 Series I/O modules (a variety of both analog, digital and special function modules are available).  This serves to simplify installation and reduce wiring errors in the field.  For more information contact WAGO at 1-800-DIN-RAIL, info.us@wago.com, or www.wago.us.

 

 

WAGO's TopJobS seriesWAGO's TOPJOB®S Series
WAGO's TOPJOB®S series of DIN rail mounted terminal blocks utilize the revolutionary CAGE CLAMP®S spring pressure connection technology allows solid wire, tin-bonded wire or ferruled stranded wire to be connected by simply inserting the wire into the clamping mechanism (no tools required).  When compared to the alternatives currently available in the marketplace, the TOPJOB®S series with CAGE CLAMP®S technology offers up to a 30% reduction in size, up to 50% reduction in wiring time. For more information contact WAGO at 1-800-DIN-RAIL, info.us@wago.com, or www.wago.us.

 

 

 

 

 

 

WAGO's 757 SeriesWAGO IP 67/68 Sensor/Actuator Junction Boxes

WAGO introduces the new IP 67/68 rated sensor/actuator junction boxes to the WAGO-I/O-SYSTEM family of products.  Designated the 757 Series, this product safely extends control cabinet functions out into the field and locally on the machine or process and are available in 4, 6, or 8 ports per box with either 4 or 5 poles per port (5 pole versions allow 2 signal lines per port).  For more information contact WAGO at 1-800-DIN-RAIL, info.us@wago.com, or www.wago.us.